Exterior Venetian Blinds

An effective shading solution. Global Shading Solution’s exterior venetian blind offers the very best of all solutions, providing maximum flexibility for controlling heat gain, light control, visually provides a contemporary look, provides visual comfort and glare for residents.

ALL METAL SLAT BLIND GM 100

Robust venetian blind with 90mm wide flanged slats. Can be used for sun and weather protection. Good insulation and darkening properties. Drop with forced-drive and slats that are automatically locked in every position. Reefing blind specially designed to resist buckling with a single profile sealing lip and no visible joints in the slat area.

Supporting frame
Galvanised steel plate, closed at the top. Grooved tube and limiting mechanism have been installed for the manual drive. No need to attach at the top.

Slats
Made from powder-coated aluminium. Held on both sides by metal supports and secured with plastic clips. Can be individually replaced from the inside. Raised and lowered when slats are open. Automatic locking of the lowest slat position. Individually adjustable slat inclination. Slat colours can be selected from the colour range (standard colours).

Guides
Made from a clear anodised, extruded light metal alloy with noise-suppressing plastic inserts. Metal rocker and lifting elements are installed in the guides.

Drive
Maintenance-free, dust-protected gears with integrated brake, extendable PVC-coated articulated crank.

Malax – the best plastic seal! A sealing washer or insert available for an additional charge.

Motor with two lower limit switches, installed in the supporting channel, and a plug connection (both parts).

Electrical connections must be set up by the customer.

ALL METAL SLAT BLIND GM 200

Stable blind with flanged slats, 92 mm wide. Can be used as sun and weather-protection. Good insulation and darkening characteristics. Individually adjustable slat inclination. The blind can be locked in every intermediate position and offers a high degree of protection against burglary. The slat shape has been specially designed for resistance to buckling with bonded-in insulation lip. Without visible vertical connection elements in the slat area. No upwards fixation necessary.

Slats
Made from powder-coated aluminium. Retained by metal supports on both sides and secured with stainless steel clips. Can be replaced individually from the inside. Basic model (Type G). Lowered in the almost closed, and raised in the horizontal slat position. Slat colours from the colour range.

Guides
Made from extruded aluminium profile, clear anodised, with noise-suppressing plastic inserts. Metal tilting and raising elements built into the guides.

Drive
Manual operation using a maintenance-free, dust-protected gears with integrated brake.
Extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

METAL COMPACT VENETIAN BLIND MV 90

Metal compact venetian blind with flanged slats, 90 mm wide. Can be used as sun and weather-protection, and also for darkening. Reinforced, angled slat profiles with slightly convex surfaces. Optimum darkening and very good noise insulation characteristics thanks to the insulation lip bonded into the slats. The blind is locked in every intermediate position.

Supporting frame
Made from galvanised steel sheet, closed at the top. Rockers, weatherstrip groove and limit for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, with plastic guide bolts mounted on both sides.
Basic model (Type G). Lowered in the closed, and raised in the horizontal slat position.
Slat colours from the colour range.

Mounting strap
Made from polyester, reinforced with Kevlar and connected directly to the slats with stainless steel clamps.

Drop closure
Made from extruded aluminium profile, clear anodised, guided by bolts on both sides. Horizontal setting in every slat position.

Guides
Side guides made from extruded aluminium profile, clear anodised, with noise-suppressing plastic inserts and integrated lifting and locking elements. Guides mounted on soffits (or on holder at extra cost). Countersunk guides at an extra cost.

Drive
Manual operation using a maintenance-free, dust-protected gears with integrated brake. Extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

COMPACT VENETIAN BLIND VR 77

Compact venetian blind with 70 mm wide flanged slats. Can be used for sun and weather protection, as well as a darkening system. Individually adjustable slat inclination. Reinforced, angled slat profile with slightly convex surfaces. Optimal darkening and very good noise insulation thanks to the single profile noise-suppressing lip in the slats.

Supporting frame
Made from galvanised sheet steel, closed at the top. The rockers and grooved tube are already installed.

Slats
Made from powder-coated aluminium with alternately mounted plastic guide bolts.
The basic model (Type G) is lowered in the closed slat position and raised in the horizontal. The colour of the slats can be selected from the colour range.

Mounting strap
Made from polyester, reinforced with Kevlar and connected directly to the slats with stainless steel clamps.

Lifting cord
Made from grey Terylene fibre with a special finish to prevent fraying, U-resistant, etc. (Xeno-test).

Drop closure
Made from clear anodised, extruded aluminium, guided on both sides with bolts, can be tilted all together with the drop.

Guides
Side guides made from clear anodised, extruded aluminium with noise-suppressing plastic inserts.

Drive
Manual drive using a maintenance-free, dust-protected gears with integrated brake, extendable PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch, installed in the supporting channel, and a plug connection (both parts). Blind motors must not be connected in parallel.

COMPACT VENETIAN BLIND VR 70

Compact venetian blind with 70 mm wide flanged slats. Can be used for sun and weather protection, as well as a darkening system. Individually adjustable slat inclination. Reinforced, angled slat profile with slightly convex surfaces. Optimal darkening and very good noise insulation thanks to the single profile noise-suppressing lip in the slats.

Supporting frame
Made from galvanised sheet steel, closed at the top. The rockers and grooved tube are already installed.

Slats
Made from powder-coated aluminium with alternately mounted plastic guide bolts.
The basic model (Type G) is lowered in the closed slat position and raised in the horizontal. The colour of the slats can be selected from the colour range.

Mounting strap
Made from polyester, reinforced with Kevlar and connected directly to the slats with stainless steel clamps.

Lifting cord
Made from grey Terylene fibre with a special finish to prevent fraying, U-resistant, etc. (Xeno-test).

Drop closure
Made from clear anodised, extruded aluminium, guided on both sides with bolts, can be tilted all together with the drop.

Guides
Side guides made from clear anodised, extruded aluminium with noise-suppressing plastic inserts.

Drive
Manual drive using a maintenance-free, dust-protected gears with integrated brake, extendable PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch, installed in the supporting channel, and a plug connection (both parts). Blind motors must not be connected in parallel.

COMPACT VENETIAN BLIND TRIANGLE VR 90 T

Compact venetian blinds with flanged slats, 90 mm wide, designed in a rectangular triangular shape. Suitable for sun shading or as a darkening system. The slats are horizontal when lowered, swivel-mounted on one side, and stacked on the end rail when they are raised. When retracted, the slats are always stowed in the supporting frame on the hypotenuse side.

Supporting frame
The supporting structure is made of aluminium with built-in rockers, slotted pipe and motor drive. This construction must be accessible from the outside (mounting with screen plate)

Slats
Made from powder-coated aluminium, with plastic swivel joints and die-cast guide bolts.
Lowering when slats are closed, lifting when in open position. Slats pivot-mounted on one side. Slat colours from the colour range.

Mounting strap
Made from polyester, reinforced with Kevlar and connected directly to the slats with stainless steel clamps.

Drop closure
Made from extruded, telescopic aluminium profile, powder-coated. The end rail rotates on one side and is connected to the lifting mechanism on the opposite side.

Guides
Lateral guide rails made from extruded aluminium, clear anodised, with noise-suppressing plastic insert and built-in lifting element.

Drive
Motor with a lower limit switch, integrated into the supporting channel, as well as plug-in connection (both parts).
Blind motors may not be connected in parallel).

The system must not be operated under windy or frosty weather conditions.

COMPACT VENETIAN BLIND VR LO 90

Light-optimised compact venetian blind with flanged slats, 90 mm wide. Can be used as sun and weather-protection, for light diversion and for darkening. Individually adjustable slat inclination. Continuously adjustable transition of the slats from vertical (down) up to approx. 30° opened (up) with drop lowered. Close the drop by operating the drive again.

Reinforced, angled slat profiles with slightly convex surfaces. Optimum darkening and very good noise insulation characteristics thanks to the insulation lip bonded into the slats.

Supporting frame
Made from galvanised steel plate, closed at the top. Rockers, slotted pipe and limitation for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, with plastic guide bolts welded in on alternate sides.
Work position, lowered in the tilted position, and raised in the horizontal slat position.
Slat colours from the colour range.

Mounting strap
Made from Terylene, with direct connection to slats through non-rusting clamp.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, guided by bolts on both sides, rocker bar with the complete drop.

Guides
Side guides made from extruded aluminium profile, clear anodised, with noise-suppressing plastic inserts or steel cable side guides, diameter 2.5 mm with plastic casing and spring pre-tensioning.

Drive
Manual operation using a maintenance-free, dust-protected gearbox with integrated brake, extendable. PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with two lower limit switches, built into the support channel, together with plug-in connection (both parts).  Blind motors may not be connected in parallel.

CONVEX AND FLAT SLAT ONVEX AND FLAT SLAT

ECONOMY SLAT BLIND EC 100

Drop consisting of flexible slats, 100 mm wide. Can be used for sun protection. Individually adjustable slat inclination.

Supporting frame
Made from galvanised steel plate, closed at the top. Rockers, slotted pipe and limitation for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, lowered in the closed and raised in the horizontal slat position. Slat colours from the colour range.

Guide cord
Made from Trevira, connected form-fit to the slat.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, can be tilted with the complete drop.

Guides
Steel cable side guides, diameter 2.5 mm with plastic casing and spring pre-tensioning or lateral guides made from extruded aluminium profile, clear anodised, with noise-suppressing plastic inserts.

Drive
Manual drive using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

The electrical connections must be set up by the customer.

ECONOMUY SLAT BLIND EC 50

Drop consisting of flexible slats, 50 mm wide. Individual adjustment of the incidence of light in every position.

Supporting frame
Made from galvanised steel plate, closed at the top. Rockers, slotted pipe and limitation installed for manual operation.

Slats
Made from powder-coated aluminium. Alternately riveted metal guide bolts. The colours for the slats can be selected from the VSR collection, no. 140 alu / 130 grey / 010 white.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Mounting strap / Mounting belt
Grey mounting strap for indoor blinds, white mounting belt for external blinds, both made from polyester.

Drop closure
Made from clear anodised aluminium. Guided on both sides with bolts.

Guides
Lateral guides made from clear anodised, extruded aluminium, with noise-suppressing plastic inserts.

Drive (manual)
Manual drive using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Drive (motor)

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

CONVEX VENETIAN BLIND KR 80

Convex venetian blind with flanged slats, 80 mm wide. Can be used as sun and weather-protection.
Individually adjustable slat inclination.

Supporting frame
Made from galvanised steel sheet, closed at the top. Rockers, weatherstrip groove and limit for upper and lower stops installed for manual operation.

Slats
Made from powder-coated aluminium, with plastic guide bolts mounted on alternate sides.
Basic model (Type G). Lowered in the closed, and raised in the horizontal slat position.
Slat colours from the colour range.

Mounting strap
Made from polyester, reinforced with Kevlar and connected directly to the slats with stainless steel clamps.

Lifting cord
Made from grey Terylene fibre with special finish resistant to abrasion, UV radiation, etc. (Xeno test).

Drop closure
Made from extruded aluminium profile, clear anodised, guided by bolts on both sides, rocker bar with the complete drop.

Guides
Lateral guides made from extruded aluminium profiles, clear anodised, with noise-suppressing plastic inserts or lateral steel cord guides, diameter 2.5 mm, with plastic sheathing and spring preloading (when larger than 3 m, the cords are in the drop area).

Drive
Manual operation using a maintenance-free, dust-protected gears with integrated brake, extendable, PVC-coated articulated crank.

Malax – the proven plastic seal! Sealing washer or insert available at extra cost.

Motor with one lower limit switch built into the support channel, together with plug-in connection (both parts). Blind motors may not be connected in parallel.

Contact Global Shading Solutions to discuss your requirements by email